Fuzhou Canwell Import & Export Co Ltd

Model Number: 294-A001 NFGP series Key Specifications/Special Features: NFGP series is improved type of SFGP series, which thickness is 13.0mm onlyThe series can provide an isolated power source to the 2-wire transmitter field installed, and at the same time converts the 4~20mA signal from transmitter to 1~5V/4~20mA signal isolated with power sourceThat carries out the isolation between input, output and power source each other1.Input signal: 0~10mA/4~20mA/0~5V/1~5V/0~10V2.Input impedance: current: 51Ω, voltage: 500KΩ3.Output signal: 0~10mA/4~20mA/0~5V/1~5V/0~10V4.Output resistance: 250Ω (when 1~5V output), >500KΩ(when 4~20mA output)5.Load resistance: ≤500Ω (when 4~20mA output)6.Accuracy: ±0.2%F.S(default) ±0.1%F.S(remark when ordering)7.Temperature coefficient: ±0.15%F.S/10C8.Response time (0-90%,100%-10%)<10ms9.Dielectric resistance: ≥100MΩ/500VDC10.Dielectric strength: 1000VAC*1min betweeninput/output/power source each other11.Power supply: 20~30VDC12.Power supply indicate: LED lights red lamp when power on
13.Current consumption (when 24VDC power supply)
≤45mA(1-in/1-out)
≤55mA(1-in/2-out)
≤85mA(2-in/2-out)
≤70mA(1-in/3-out)
14. Max output current limit: about 26mA
15.Operating condition: temperature: -10~60C; RH: ≤85%
16. Figuration dimension: 13*122*117mm(W*H*D)
17. Mount type: support rail of TS35